I-7242D

SKU 4147

The I-7242D is one of CAN bus products in ICP DAS. The device allows a master located on a DeviceNet network to enter into a dialogue with the slaves on a Modbus RTU network In DeviceNet network, it is a Group 2 Only Slave device, and supports “Predefined Master/Slave Connection Set”.

t is a general protocol converter operating in a way that is transparent to the user. In addition, we also provide the utility software for users to configure the I-7242D parameters and build the EDS file. Users can easily apply Modbus RTU devices in DeviceNet applications with the I-7242D.

See the Product PDF Datasheet for Full Specifications.

DeviceNet Features

  • Group two only server DeviceNet subscriber
  • Dynamic Assembly Objects Mapping
  • On-line change baud rate and MAC ID of CAN
  • NS, MS and IO LED indicators
  • 7-segmemt LED to show operation mode, MAC ID, baud rate and error code
  • Connection supported:
    • “Explicit Connection”
    • “Polled Command/Response” connection
    • Bit-Strobed Command/Response” connection
    • “Cnange-of-State / Cyclic” connection
  • Configuration facilitated by the use of specific EDS files
  • Dedicated Explicit message interface for full Modbus interface
  • Explicit & I/O length: 240 bytes max.

Modbus RTU Features

  • Maximum number of subscribers: 10 Modbus commands
  • Communication speed: 1200,2400,4800,9600,19200,38400,57600 or 115200 bits/s, configured using  Utility
  • Data bits: 8 bits, configured using Utility
  • Parity bits: None, even or odd, configured using Utility
  • Stop bits: 1 or 2 bits, configured using Utility

I-7242D-G: DeviceNet Slave / Modbus RTU Master Gateway
I-7242D-G CR: DeviceNet Slave / Modbus RTU Master Gateway (RoHS)

  • ICP DAS