PIO-D48SU

SKU 3596

The PIO-D48SU supports 3.3 V/5 V PCI bus. These cards provide 48 TTL digital I/O lines, and these lines are grouped into six 8-bit bi-direction ports. Every three 8-bit ports are grouped as port A (PA), port B (PB) and port C (PC) on a connector, and the port C can be split into 2 nibble-wide(4-bit) parts. All ports are configured as inputs upon power-up or reset.

The PIO-D48SU also adds a Card ID switch and pull-high/ pull-low resisters for DI on board. Users can set Card ID on a board and recognize the board by the ID via software when using two or more PIO-D48SU cards in one computer. The pull-high/ pull-low resisters allow the DI status to be specified when the DI channels are unconnected; the DI status will remain in high or low status other than floating.

  • Support the +5V PCI bus for PIO-D48
  • Support the +3.3/+5 V PCI bus for PIO-D48U/D48SU
  • Supports PCI Express x 1 for PEX-D48
  • 48 channels of digital I/O
  • Bi-direction programmable I/O ports under software control
  • All I/O lines buffered on the board
  • Six 8-bit bi-direction I/O ports
  • SMD, short card
  • Connects directly to DB-24PR, DB-24PD, DB-24RD, DB-24PRD, DB-16P8R,
    DB-24POR, DB-24SSR, DB-24C or any OPTO-22 Compatible daughter boards.
  • One 32-bit programmable internal timer
  • One DB37 connector and one 50-pin box header for PIO-D48U/PEX-D48
  • One SCSI II 100-pin connector for PIO-D48SU
  • One 16-bit event counter
  • Interrupt source: 4-channel
  • Card ID function for PIO-D48SU/D48U/PEX-D48
  • Pull-up or pull-down resistors on I/O lines
  • Emulate two industrial-standard 8255 PPI ports (mode 0)
  • Buffer output for higher driving capability
  • DIO response time is about 0.77 μs (1.3 MHz max.) for PIO-D48U/D48SU
  • DIO response time is about 500 kHz for PEX-D48
  • Output status readback

PIO-D48SU:  Universal PCI bus,48-channel digital I/O Board

  • ICP DAS