March 30, 2021
Backplane Systems Technology is proud to present the MILCOTS-4x Mission Computer, which was developed with the target to meet the MIL-STD-810 as well as parts of the DO-160 specifications. The solution is installed in a compact IP67 housing with a total of four MIL connectors.
The engineering approach taken is very different to most rugged solution in the market. The internal wiring has been eliminated as much as possible. The D38999 MIL connectors are soldered on special MPL designed rigid-flex PCBs. The EMI protection in each interface is integrated directly to the connector on the PCBs. This will give best EMI efficiency.
To interface to the standard embedded CPU board from MPL, a mating interface board (ICC) has been designed. The flex part of the connector PCB is connected to the ICC which is interfacing cable free directly to the CPU board. With this concept MPL is able to meet basically any standard in the rugged computing environment. If required, the boards can be coated and bonded to increase the robustness even further.
The MILCOTS-4x comes with interfaces like DVI-D, USB 2.0, GPIOs, serial lines, dual LAN, and a wide power input. Additional expansions can be done over the internal expansion interfaces such as mPCIe, m.2, or PCIe/104. These expansions can be easly and quickly integrated into the system. This makes the solution flexible, cost efficient, and customizable.
Key Features:
- 9th Generation Intel CPUs
- Up to 64GB DDR4 Memory (Depending on CPU)
- Fanless Operation, also from -40°C to +75°C
- Long-Term Availability (Typically 10 years or more, 20+ years repair)
- Extremely Flexible
See More:MILCOTS-46