- Supports IPv4
- Supports Modbus/TCP communication protocol at Ethernet port.
- Supports Modbus/RTU communication protocol at RS-232 port.
- Supports 8K and 87K series DI/DO/AI/AO/Counter/Frequency modules
- I/O configurable via the Ethernet (Using the Modbus Utility) I/O scan engine
- The engine can automatically scan I/O modules plug in slots and range I/O registers address to continuous to have high-data-density registers to get best communication efficiency.
- Support power on value and safe value for analog/digital output module.
- Detection of I/O module communication status (online/offline).
- The SMMI of the panel can be used to
- Configure the network setting (IP, Mask, Gateway)
- Set the offset value of AI/AO module
- Allowed a maximum of 8 host PCs access simultaneously
- Firmware updateable (via the RS-232 port)
- Firmware programmable
- We provide the Modbus SDK allowing users customized the Modbus firmware.
I-8KE4-MTCP-G & I-8KE8-MTCP-G
I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.. Most SCADA software support Modbus communication protocol, thus users can easily and quickly integrate remote I/Os to the SCADA software as data acquisition and monitor to apply to environment monitoring, power management, factory automation, etc.
I-8KE4-MTCP-G: 4-slots Ethernet I/O unit (Gray color)
I-8KE8-MTCP-G: 8-slots Ethernet I/O unit (Gray color)
- ICP DAS